The Superior Standard for Post Frame Buildings!

Call Us Today!

One of the questions we get from time to time is:

“Can I put a car lift inside my Mallett building?”

It is a great question and the answer is yes, but there are some very important structural considerations you need to understand before you build.

Let’s break it down clearly.

1. Building Height Matters More Than You Think

Most two-post vehicle lifts have:

  • An overall height around 11 feet
  • A lifting height between about 6 feet 2 inches and 6 feet 8 inches
  • A weight capacity commonly around 11,000 pounds

If you purchase a 12 foot eave height building, you typically get around 11 feet of interior clearance at the wall. That can be tight.

In most cases, a 14 foot building is the safer choice if you plan to install a lift. A 12 foot building may technically work, especially with a scissor truss, but it will be close.

Before finalizing your building height:

  • Verify the exact lift specifications
  • Confirm total height required
  • Consider ceiling clearance for raised vehicles

Planning ahead prevents expensive modifications later.

2. Your Concrete Slab Is Critical

This is where things get serious.

A vehicle lift creates concentrated loads at the base plates where it anchors into the concrete. Those loads are not evenly distributed like a parked vehicle.

For example:

A Ford F-150 weighs roughly 4,000 to 6,000 pounds empty. When lifted, that weight is transferred to two columns. That means each side may carry around 3,000 pounds — and potentially more depending on the vehicle.

Now add dynamic forces and torque from lifting.

That is not a small load.

3. Why Slab Thickness Makes a Huge Difference

Concrete strength does not increase linearly with thickness.

Based on engineering research on concrete slabs under concentrated loads:

  • A 4 inch slab supports significantly less load
  • A 6 inch slab can support roughly twice the load capacity of a 4 inch slab

This is because slab strength increases exponentially due to the way bending resistance works. The depth of the slab is squared in the structural formula that governs performance.

In simple terms:

A 6 inch slab is not just 50 percent stronger than a 4 inch slab. It is dramatically stronger.

This is why:

  • Roads are built 6 inches thick or more
  • Heavy load areas use thicker concrete
  • No one builds highways with 4 inch slabs

In real-world performance, thicker concrete consistently outperforms thinner concrete under heavy loads.

4. You May Need More Than Just a Thicker Slab

Simply pouring a 6 inch slab may not be enough.

Many lift manufacturers recommend:

  • Thickened pads below the lift columns
  • Reinforced concrete footings
  • Specific anchor bolt embedment depths
  • Minimum PSI concrete strength

In some cases, you may need a localized foundation area beneath each column that is much thicker than the rest of the slab.

This is not guesswork.

You should:

  • Consult a structural engineer (Mallett has an in-house engineer)
  • Review the lift manufacturer’s installation guidelines
  • Design the slab before pouring concrete

Installing a lift after the slab is poured without planning can create serious structural risks.

5. Stability Considerations

Two-post lifts rely on anchor bolts and concrete integrity to resist:

  • Vertical loads
  • Bending forces
  • Twisting and torque

That rotational force is a major consideration.

From a stability standpoint, these loads must be properly transferred into the slab and underlying soil. Poor soil conditions or insufficient slab thickness can lead to cracking or failure.

This is why engineering input matters.

6. Concrete Strength Matters Too

Slab thickness is not the only variable.

Concrete compressive strength also plays a role.

For example: 3,000 PSI concrete performs differently than 4,000 PSI concrete

Higher PSI increases the modulus of rupture, which improves resistance to cracking under concentrated loads.

If you are planning a lift, upgrading concrete strength may be advisable.

7. Real-World Example

A 4 inch driveway slab on firm soil can crack under the load of a small dump truck.

Meanwhile, 6 inch road slabs handle:

  • Heavy rain
  • Concrete trucks
  • Daily traffic

That practical comparison shows why thickness matters.

Final Recommendations If You Want a Car Lift

If you are planning a lift in your post-frame building:

  • Choose at least a 14 foot building for adequate clearance
  • Strongly consider a 6 inch slab at minimum
  • Consult an engineer before pouring concrete
  • Follow the lift manufacturer’s foundation requirements
  • Design the slab for concentrated loads, not just parked vehicles

     

Planning correctly at the beginning is far less expensive than retrofitting later.

Thinking About Adding a Lift to Your Mallett Building?

If you are still in the design phase, this is the perfect time to address slab thickness, building height, and foundation reinforcement.

Concrete is permanent. Once it is poured, changes are costly.

Make sure your building is designed to handle the load safely and correctly from day one.

If you have questions about slab thickness, building height, or engineering requirements for your lift, reach out before you build.

It is always easier to design it right the first time.

Leave a Reply

Your email address will not be published. Required fields are marked *

Quick Estimate

Need a fast quote? Fill out this short form and we’ll get back to you with a quick estimate for your building project.