The Superior Standard for Post Frame Buildings!

Call Us Today!

In post-frame construction, one of the most misunderstood forces acting on a building is uplift. While gravity constantly pulls a structure downward, wind can create the opposite effect — a vertical lifting force that attempts to pull the building out of the ground.

Uplift occurs when wind moves across and around a structure, creating pressure differences between the exterior and interior. Just like an airplane wing generates lift, wind flowing over a roof can create upward forces that act on posts, connections, and foundations.

In southern coastal regions, where sustained winds, storm systems, and saturated soils are common, uplift is not a theoretical concern. It is a real-world, repeat stress that acts on buildings year after year.

Why Uplift Is a Long-Term Structural Risk

Most building failures do not happen all at once. Instead, they begin with small, incremental movements that accumulate over time.

Repeated uplift forces can:

  • Loosen posts within the ground or slab
  • Stress fasteners and connections
  • Allow subtle vertical movement that compromises alignment
  • Accelerate wear long before visible damage appears

While building code establishes minimum requirements for safety, it does not always account for how structures behave after decades of exposure to high winds, wet soil conditions, and repeated storm cycles.

Building in the Southern Coastal Environment

Southern coastal regions present unique challenges for post-frame construction:

  • High wind events are frequent, not rare
  • Soil conditions can change dramatically with moisture saturation
  • Water intrusion reduces natural soil resistance
  • Wind loads are often sustained rather than momentary

In these conditions, relying solely on the weight of concrete or basic embedment is often not enough to counteract long-term uplift forces.

How the Mallett Cable Lock System Was Developed

After building in southern coastal environments, Mr. Lee Mallett recognized a consistent pattern: buildings that met code still experienced long-term movement when exposed to repeated wind events.

Rather than designing solely to pass inspection, Mr. Lee focused on how post-frame buildings actually perform over time. His goal was simple — keep posts locked in place for the life of the building, not just the day it was approved.

The result was the Mallett Cable Lock System, a best-practice construction method used to exceed engineering minimums and directly counter uplift forces.

How the Mallett Cable Lock System Works

The Mallett Cable Lock System is installed after the forming stage of construction and before the concrete is poured.

The process includes:

  • Placement of a moisture barrier
  • Installation of aircraft-grade cables running post to post
  • Cables arranged in a criss-cross pattern, tying all posts together
  • Pouring microfiber-reinforced concrete over the system

This creates a unified structural system where posts, cables, and concrete work together rather than independently.

Why This System Controls Uplift More Effectively

Traditional construction often relies on mass alone, using the weight of concrete to resist uplift. While weight helps, it does not mechanically prevent movement, especially when soil conditions change.

The Mallett Cable Lock System adds mechanical resistance:

  • Posts are physically tied together
  • Uplift forces are distributed across the entire structure
  • Vertical movement is restrained by reinforced concrete locking the cable network in place

Instead of each post resisting uplift on its own, the building behaves as a single, interconnected system.

Exceeding Engineering Minimums by Design

The Mallett Cable Lock System is not required by code. It is not an engineering minimum. It is a deliberate choice.

This system:

  • Exceeds standard uplift resistance requirements
  • Reflects real-world building experience
  • Is included in Classic, Signature, and Elite Buildings

While many builders stop at what is required, Mallett Buildings builds beyond what is expected.

Mallett Buildings is currently the only post-frame builder in the region using this cable-based uplift control system as a standard practice.

It is not visible once construction is complete. But it plays a critical role in long-term durability, especially in high-wind coastal environments.

This is the difference between building to meet code and building to withstand reality.

The Mallett Cable Lock System represents a philosophy rooted in experience, not shortcuts. By addressing uplift directly and mechanically, Mallett Buildings ensures its structures remain stable, aligned, and secure for decades to come.

Leave a Reply

Your email address will not be published. Required fields are marked *

Quick Estimate

Need a fast quote? Fill out this short form and we’ll get back to you with a quick estimate for your building project.